Radiometric Dating

Roger C. Wiens has a PhD in Physics, with a minor in Geology. His PhD thesis was on isotope ratios in meteorites, including surface exposure dating. First edition ; revised version Radiometric dating–the process of determining the age of rocks from the decay of their radioactive elements–has been in widespread use for over half a century. There are over forty such techniques, each using a different radioactive element or a different way of measuring them. It has become increasingly clear that these radiometric dating techniques agree with each other and as a whole, present a coherent picture in which the Earth was created a very long time ago.

Why is it difficult to date sedimentary rocks using radiometric dating techniques?

Most absolute age determinations in geology rely on radiometric methods. The earth is billions of years old. The main condition for the method is that the production rate of isotopes stays the same through ages, i.

However, radiometric dating generally yields the age of metamorphism, not the age of the original rock. Most ancient sedimentary rocks cannot be dated.

Radioactive elements decay at a certain constant rate and this is the basis of radiometric dating. But, the decay elements need to be set, much like you would re-set a stop watch for a runner, to ensure an accurate measurement. When minerals get subducted into the Earth and come back as volcanic magmas or ash, this essential re-sets the radiometric clock back to zero and therefore a reliable age date is possible. Sedimentary rocks may have radioactive elements in them, but they have been re-worked from other rocks, so essentially, there radiometric clock has not been re-set back to zero.

However, sedimentary rocks can be age dated if a volcanic ash horizon or a diabase sill or dyke can be found within the sequence. For example, if you find a dinosaur bone in a sedimentary sequence and you find an ash layer 10 meter above the bone and another ash layer 20 meters below it, you can determine the age of the two ash layers. You can then infer that the dino must have lived some time between these two age dates.

Why is it difficult to date sedimentary rocks using radiometric dating techniques? Don Mac. Mar 23,

RADIOMETRIC TIME SCALE

The following radioactive decay processes have proven particularly useful in radioactive dating for geologic processes:. Note that uranium and uranium give rise to two of the natural radioactive series , but rubidium and potassium do not give rise to series. They each stop with a single daughter product which is stable.

Radiometric dating calculates an age in years for geologic materials by measuring Whole crushed volcanic rocks (e.g., lava flows and ash).

The problem : By the mid 19th century it was obvious that Earth was much older than years, but how old? This problem attracted the attention of capable scholars but ultimately depended on serendipitous discoveries. Early attempts : Initially, three lines of evidence were pursued: Hutton attempted to estimate age based on the application of observed rates of sedimentation to the known thickness of the sedimentary rock column, achieving an approximation of 36 million years.

This invoked three assumptions: Constant rates of sedimentation over time Thickness of newly deposited sediments similar to that of resulting sedimentary rocks There are no gaps or missing intervals in the rock record. In fact, each of these is a source of concern. The big problem is with the last assumption. The rock record preserves erosional surfaces that record intervals in which not only is deposition of sediment not occurring, but sediment that was already there who knows how much was removed.

Associated terminology: Conformable strata : Strata which were deposited on top of one another without interruption. Unconformity : An erosional surface that marks an interval of non-deposition or removal of deposits – a break in the stratigraphic sequence. Sequence : Group of conformable layers lying between unconformities.

FAQ – Radioactive Age-Dating

All absolute isotopic ages are based on radioactive decay , a process whereby a specific atom or isotope is converted into another specific atom or isotope at a constant and known rate. Most elements exist in different atomic forms that are identical in their chemical properties but differ in the number of neutral particles—i. For a single element, these atoms are called isotopes. Because isotopes differ in mass , their relative abundance can be determined if the masses are separated in a mass spectrometer see below Use of mass spectrometers.

Radioactive decay can be observed in the laboratory by either of two means: 1 a radiation counter e. The particles given off during the decay process are part of a profound fundamental change in the nucleus.

Radiometric dating is not very useful for determining the age of sedimentary rocks. To estimate the age of a sedimentary rock, geologists find.

Geologists often need to know the age of material that they find. They use absolute dating methods, sometimes called numerical dating, to give rocks an actual date, or date range, in number of years. This is different to relative dating, which only puts geological events in time order. Most absolute dates for rocks are obtained with radiometric methods. These use radioactive minerals in rocks as geological clocks.

The atoms of some chemical elements have different forms, called isotopes. These break down over time in a process scientists call radioactive decay. Each original isotope, called the parent, gradually decays to form a new isotope, called the daughter. Isotopes are important to geologists because each radioactive element decays at a constant rate, which is unique to that element.

How do geologists use carbon dating to find the age of rocks?

Radiometric dating of rocks and minerals using naturally occurring, long-lived radioactive isotopes is troublesome for young-earth creationists because the techniques have provided overwhelming evidence of the antiquity of the earth and life. Some so-called creation scientists have attempted to show that radiometric dating does not work on theoretical grounds for example, Arndts and Overn ; Gill but such attempts invariably have fatal flaws see Dalrymple ; York and Dalrymple Other creationists have focused on instances in which radiometric dating seems to yield incorrect results.

Atoms of a parent radioactive isotope randomly decay into a daughter isotope. Radiometric dating of igneous rocks contained in sedimentary sequences have.

Geologists do not use carbon-based radiometric dating to determine the age of rocks. Carbon dating only works for objects that are younger than about 50, years, and most rocks of interest are older than that. Carbon dating is used by archeologists to date trees, plants, and animal remains; as well as human artifacts made from wood and leather; because these items are generally younger than 50, years.

Carbon is found in different forms in the environment — mainly in the stable form of carbon and the unstable form of carbon Over time, carbon decays radioactively and turns into nitrogen. A living organism takes in both carbon and carbon from the environment in the same relative proportion that they existed naturally. Once the organism dies, it stops replenishing its carbon supply, and the total carbon content in the organism slowly disappears.

Scientists can determine how long ago an organism died by measuring how much carbon is left relative to the carbon

7.2: Absolute Dating

A relative age simply states whether one rock formation is older or younger than another formation. The Geologic Time Scale was originally laid out using relative dating principles. The geological time scale is based on the the geological rock record, which includes erosion, mountain building and other geological events.

Geologists use radiometric dating to estimate how long ago rocks formed, and to When molten rock cools, forming what are called igneous rocks, radioactive.

Geologists use radiometric dating to estimate how long ago rocks formed, and to infer the ages of fossils contained within those rocks. Radioactive elements decay The universe is full of naturally occurring radioactive elements. Radioactive atoms are inherently unstable; over time, radioactive “parent atoms” decay into stable “daughter atoms.

When molten rock cools, forming what are called igneous rocks, radioactive atoms are trapped inside. Afterwards, they decay at a predictable rate. By measuring the quantity of unstable atoms left in a rock and comparing it to the quantity of stable daughter atoms in the rock, scientists can estimate the amount of time that has passed since that rock formed. Sedimentary rocks can be dated using radioactive carbon, but because carbon decays relatively quickly, this only works for rocks younger than about 50 thousand years.

So in order to date most older fossils, scientists look for layers of igneous rock or volcanic ash above and below the fossil.

Radioactive dating

Here I want to concentrate on another source of error, namely, processes that take place within magma chambers. To me it has been a real eye opener to see all the processes that are taking place and their potential influence on radiometric dating. Radiometric dating is largely done on rock that has formed from solidified lava. Lava properly called magma before it erupts fills large underground chambers called magma chambers. Most people are not aware of the many processes that take place in lava before it erupts and as it solidifies, processes that can have a tremendous influence on daughter to parent ratios.

Such processes can cause the daughter product to be enriched relative to the parent, which would make the rock look older, or cause the parent to be enriched relative to the daughter, which would make the rock look younger.

Because the elements used for dating need to be re-set by volcanism. Explanation: Radioactive elements decay at a certain constant rate and.

You’ve got two decay products, lead and helium, and they’re giving two different ages for the zircon. For this reason, ICR research has long focused on the science behind these dating techniques. These observations give us confidence that radiometric dating is not trustworthy. Research has even identified precisely where radioisotope dating went wrong. See the articles below for more information on the pitfalls of these dating methods.

Radioactive isotopes are commonly portrayed as providing rock-solid evidence that the earth is billions of years old. Since such isotopes are thought to decay at consistent rates over time, the assumption is that simple measurements can lead to reliable ages. But new discoveries of rate fluctuations continue to challenge the reliability of radioisotope decay rates in general—and thus, the reliability of vast ages seemingly derived from radioisotope dating.

About Isotopic Dating: Yardsticks for Geologic Time

Relative time allows scientists to tell the story of Earth events, but does not provide specific numeric ages, and thus, the rate at which geologic processes operate. Relative dating principles was how scientists interpreted Earth history until the end of the 19th Century. Because science advances as technology advances, the discovery of radioactivity in the late s provided scientists with a new scientific tool called radioisotopic dating.

Using this new technology, they could assign specific time units, in this case years, to mineral grains within a rock. These numerical values are not dependent on comparisons with other rocks such as with relative dating, so this dating method is called absolute dating [ 5 ]. There are several types of absolute dating discussed in this section but radioisotopic dating is the most common and therefore is the focus on this section.

Dating the Rocks with Sr-Rb “Isochron” Method What steps are involved in Rb-Sr Dating? A Mass Spectrometer is used to Measure Isotopic Ratios.

It is an accurate way to date specific geologic events. This is an enormous branch of geochemistry called Geochronology. There are many radiometric clocks and when applied to appropriate materials, the dating can be very accurate. As one example, the first minerals to crystallize condense from the hot cloud of gasses that surrounded the Sun as it first became a star have been dated to plus or minus 2 million years!!

That is pretty accurate!!! Other events on earth can be dated equally well given the right minerals. For example, a problem I have worked on involving the eruption of a volcano at what is now Naples, Italy, occurred years ago with a plus or minus of years. Yes, radiometric dating is a very accurate way to date the Earth.

How Does Radiocarbon Dating Work? – Instant Egghead #28